• Accurate 2D measurement of small parts: Xpress FOV video measuring system

    Xpress 'field of view' video measuring system - Ultra-fast. Ultra simple. http://www.visioneng.com/xpress Xpress utilises the power of high resolution field of view (FOV) measurement, enabling ultra-fast precision non-contact measurement of small, flat component parts, with ultimate simplicity. By coupling a high resolution digital camera with 'flat-field' telecentric optics, Xpress allows hundreds of measurements to be taken within the field of view, in seconds. No need to position the part, or even adjust the focus -- just place the part within the field of view, and then run the programme. Xpress is ideal for customers who require the fastest, simplest way to accurately measure their component parts. Highlights - Rapid, high accuracy 2D measurement system, within the field of vie...

    published: 23 Oct 2013
  • Profile measurement of multiple parts in seconds : Xpress FOV

    Xpress utilises the power of high resolution field of view (FOV) measurement to provide high accuracy, 2D X/Y measurements of multiple parts; typical measurement routines are completed in seconds -- all at the touch of a button. http://www.visioneng.com/xpress Multiple parts? No problem. Simply place your parts ANYWHERE in the field of view. No need to align. No need to focus. Just press RUN. Intelligent software eliminates the part alignment task and automatically locates, recognises and orientates the parts being measured. Ultimate simplicity continues with clear Go, No Go tolerance results, with full reporting capabilities for further investigation, if required. 'Field of view' non-contact measurement technology is ideally suited for fast measurement of small flat flexible parts, s...

    published: 17 Jul 2014
  • Engineering Beats Physics? /// Xpress Breakfast with Michael & Ryan

    Ryan lost out in the MasterBlind quiz this week. See what he got up to on his forfeit adventure... #EngineeringBeatsPhysics Catch Michael & Ryan every Monday 7.30am - 10am over on xpressradio.co.uk/listen

    published: 19 Nov 2017
  • XPress CLT Lappia Finland

    X-Press pressing system for X-LAM (BSP, KLH, CLT, crossplan) wall elements. The flat press is designed for planar pressing of plates for wall elements. The CLT elements can be built up of loose strips in single longitudinal and cross layers as well as from previously glued single layers. Recommend is also a combination, where the across layers are prefabricated at a separate press and are then stacked with fresh side glued longitudinal strips to a pressing stack. X-Press Pressanlage für X-LAM (BSP, KLH, CLT, crossplan) Wandelemente. Die Flächenpresse ist zur flächigen Verpressung von Plattenteile für Wandelemente ausgelegt. Die BSP Elemente können aus losen Lamellen in den einzelnen Längs- und Querlagen aufgebaut werden als auch aus vorverleimten Einschichtplatten. Zu empfehlen ist auch e...

    published: 06 Mar 2014
  • Gannen probe - Xpress Precision Engineering

    In the video you see a Gannen-XP probe on a ultra accuracy CMM. The Gannen-XP has a total 3D uncertainty of 50 nanometers, isotropic stiffness, low probing forces and is suitable for scanning.

    published: 11 Jun 2009
  • DAIKIN VRV XPRESS

    Professional design and simulation program for VRV systems with complete project description. User can calculate load, select the proper VRV system for the project and simulate to get an energy report. The software enables engineering of VRV systems taking into account the complex piping rules while ensuring optimum operating cycles and maximum energy efficiency. Designers can make accurate selections and get competitive quotations for each project.

    published: 27 Mar 2017
  • Jabra Xpress IT Admin

    Get all the details on Jabra Xpress' mass deployment and device management features

    published: 31 Jul 2013
  • Точное двумерное измерение небольших деталей: видеоизмерительная система Xpress

    Видеоизмерительная система в пределах поля зрения Xpress - Сверхбыстрая. Исключительно простая. http://www.visioneng.com/xpress Xpress использует возможности измерений высокого разрешения в пределах поля зрения и с исключительной простотой обеспечивает сверхбыстрые и высокоточные бесконтактные измерения небольших плоских деталей. За счет комбинации цифровой камеры высокого разрешения и телецентрической оптики с плоским полем изображения система Xpress позволяет практически мгновенно выполнять сотни измерительных операций в пределах поля зрения. Нет необходимости позиционировать деталь и даже настраивать фокус - нужно просто поместить компонент в пределы поля зрения, а затем запустить программу. Система Xpress идеально подходит для потребителей, которым необходим максимально быстрый и п...

    published: 17 Jan 2014
  • Toby's Tech Talk Episode 19 - June 5, 2013 - Simulation Xpress, My.Solidworks.com

    Toby's Tech Talk Episode 19 - June 5, 2013 - Simulation, SimulationXpress, My.SolidWorks.com Prism Engineering is THE SolidWorks Reseller for the Mid-atlantic area. Published on March 6, 2013 Live webinar of SolidWorks Tips and Tricks. Aired on March 6, 2013 Prism Engineering, Inc. Horsham, PA. AWARDED BY SOLIDWORKS- No 1. Reseller in customer service in North America 2011 and 2012 215-784-0800 www.Prismeng.com Hosted by the SolidWorks Technical Team at Prism Engineering, Inc.

    published: 06 Jun 2013
  • V-Xpress Engineering Goods

    Our customers have express their views on how V-Xpress has helped them in giving safe and reliable deliveries by giving honoring on time commitment

    published: 09 Oct 2014
  • Xpress: How to create a measurement programme in minutes [Metlogix M3]

    Xpress utilises the power of high resolution field of view (FOV) measurement to provide ultra-fast, high accuracy, 2D measurements of small parts. http://www.visioneng.com/xpress Creating a measurement programme takes less than 2 minutes, allowing you to measure single, or multiple parts in seconds. With Xpress, there is no need to position the part, or even adjust the focus -- just place the part ANYWHERE within the field of view, and then run the programme. Hundreds of measurements are taken (within the field of view) in seconds. Xpress is ideal for customers who require the fastest, simplest way to accurately measure their component parts. 'Field of view' non-contact measurement technology is ideally suited for fast measurement of small flat flexible parts, such as gaskets, washers,...

    published: 17 Jul 2014
  • Toby's Tech Talk Episode 20 - July 10, 2013 - Driveworks Xpress, Ctrl+Tab, Aux Programs

    Toby's Tech Talk Episode 20 - July 10, 2013 - Driveworks Xpress, DFM Xpress, Truecrypt, Keepvid, Keypass Prism Engineering is THE SolidWorks Reseller for the Mid-atlantic area. Published on July 10, 2013 Live webinar of SolidWorks Tips and Tricks. Aired on March July 10, 2013 Prism Engineering, Inc. Horsham, PA. AWARDED BY SOLIDWORKS- No 1. Reseller in customer service in North America 2011 and 2012 215-784-0800 www.Prismeng.com Hosted by the SolidWorks Technical Team at Prism Engineering, Inc.

    published: 11 Jul 2013
  • X PRESS 2 clt xpress

    X-Press cross laminated timber press The X-PRESS is a powerful and effective system for production of cross laminated timber (CLT, X-Lam,...) for which You can be sure it will meet and exceed all current and future criteria for the manufacturing process. We at LEDINEK have worked with confidence and thoroughness, have used all our knowledge and experience, to create the best CLT pressing line. CLT Presse for perfect panels. Highlights: Pneumatic pressure buildup High capacity Strong top pressure up to 0,8 N/mm2 Independent side pressure for virtually any length Thickness independent front pressure Precise glue application Moveable transport carriage Automatic sequence control XPRESS is a guarantee for accuracy, high performance and top quality products. P...

    published: 24 Mar 2017
  • GEC Xpress testing Meeting

    Meeting For the Testers for GEC Xpress

    published: 27 Jul 2017
  • XPRESS TO IMPRESS @M2R

    XPRESS TO IMPRESS @M2R

    published: 14 Sep 2014
  • Scan-Xpress Services

    Scan-Xpress offers service and access to extensive experience and market leading technologies in the following key areas: Non-Contact 3D Scanning Reverse Engineering Optical and Probe Inspection Design and Engineering Consultation Who can benefit from these services? The quick answer is anyone in manufacturing, engineering, design, development, surveying or testing. 3D scanning technology can be applied at any point in a typical manufacturing cycle, saving time, money and material. 3D scanning results in higher quality, better fitting parts that are less costly to manufacture. The cost of a typical manufacturing design cycle is reduced by 75% by utilizing 3D scanning. The illustration below outlines a typical manufacturing product cycle. 3D Scanning Advantages • Quickly c...

    published: 12 Jan 2014
  • How to Reverse-Engineer a Satellite TV Smart Card

    Notorious hacker Chris Tarnovsky opens his underground laboratory to Wired.com, providing a peek into the world of satellite TV smart-card hacking. This complicated process involves nail polish, a pin head and various acids -- so don't try this at home (unless you're Chris Tarnovsky)!

    published: 02 Jun 2008
  • DriveWorks Xpress Introduction

    How to run DriveWorks Xpress within SolidWorks. All SolidWorks Seats have DriveWorks Xpress built into the CAD Window.

    published: 24 Jun 2010
  • First look at the Xpress 'instant' video measuring system

    Xpress utilises the power of high resolution field of view (FOV) measurement to provide high accuracy, 2D measurements of small parts, in an instant. With Xpress, there is no need to position the part, or even adjust the focus -- just place the part within the field of view, and then run the programme. Hundreds of measurements are taken (within the field of view) in seconds. Xpress is ideal for customers who require the fastest, simplest way to accurately measure their component parts. Highlights - Rapid, high accuracy 2D measurement system, within the field of view (FOV) - No need for focus adjustment or sample positioning. - Reduces measurement time -- significantly. - Exceptional ease of use -- eliminates operator variances. - Go, No Go results, with full geometric tolerancing. - Ope...

    published: 05 Aug 2013
  • Mesure des profils de plusieurs pièces en quelques secondes : Xpress FOV

    Grâce à sa technologie de mesure haute résolution dans le champ de vision, le système Xpress fournit des mesures 2D très précises dans les axes X et Y de plusieurs pièces en quelques secondes seulement, à l'aide d’une seule touche. http://www.visioneng.fr/xpress Besoin de mesurer plusieurs pièces ? Pas de problème. Il suffit de les positionner N’IMPORTE OÙ dans le champ de vision. Pas besoin de les aligner. Pas besoin de faire la mise au point. Appuyez sur RUN. Plus besoin d’aligner les pièces avec ce logiciel intelligent qui localise, reconnaît et oriente automatiquement les pièces mesurées. Ce système est l’un des plus simples à utiliser avec ses résultats de tolérance Conforme / Non conforme, ainsi que ses fonctions complètes de reporting utiles pour la traçabilité. La technologie ...

    published: 16 Jan 2015
  • DriveWorks Xpress Design Automation Inside SolidWorks

    BEACON- Best Engineering Aids and Consultancies Pvt Ltd is an authorised SolidWorks Reseller. http://beacon-india.com/

    published: 11 Jun 2014
  • Refrigeration Engineers - Xpress Refrigeration

    published: 10 Oct 2013
  • XPress with vacuum station 3D

    LEDINEK X-Press X Press XPress with 2 tables and Vacuum stacking unit for CLT BSP production. Press for CLT pressing using 1K PU glue. High capacity CLT production line. Turn Key CLT Lines. XLAM x lam KLH cross lam X-Press

    published: 30 May 2014
  • Xpress CLT dry test

    First dry trials with the newly developed CLT press. Unique flexible design. Side pressure for longitudinal layers are 400 mm high! All glue lines get closed even if you make 3 x 3 layer panels. Pneumatic main pressure up to 1 N/mm² (more than most hydraulic presses) due to solid design. 1 longitudinal meter of the press weight app. 9t means a 14 m X-Press has app. 130 t own weight. Front and side pressure are servo controlled over PLC steering and is automatically adjusted to required specific pressure. X-Press

    published: 16 Oct 2014
developed with YouTube
Accurate 2D measurement of small parts: Xpress FOV video measuring system

Accurate 2D measurement of small parts: Xpress FOV video measuring system

  • Order:
  • Duration: 2:06
  • Updated: 23 Oct 2013
  • views: 7117
videos
Xpress 'field of view' video measuring system - Ultra-fast. Ultra simple. http://www.visioneng.com/xpress Xpress utilises the power of high resolution field of view (FOV) measurement, enabling ultra-fast precision non-contact measurement of small, flat component parts, with ultimate simplicity. By coupling a high resolution digital camera with 'flat-field' telecentric optics, Xpress allows hundreds of measurements to be taken within the field of view, in seconds. No need to position the part, or even adjust the focus -- just place the part within the field of view, and then run the programme. Xpress is ideal for customers who require the fastest, simplest way to accurately measure their component parts. Highlights - Rapid, high accuracy 2D measurement system, within the field of view (FOV) - No need for focus adjustment or sample positioning. - Reduces measurement time -- significantly. - Exceptional ease of use -- eliminates operator variances. - Go, No Go results, with full geometric tolerancing. - Operator training takes minutes, not hours.
https://wn.com/Accurate_2D_Measurement_Of_Small_Parts_Xpress_Fov_Video_Measuring_System
Profile measurement of multiple parts in seconds : Xpress FOV

Profile measurement of multiple parts in seconds : Xpress FOV

  • Order:
  • Duration: 1:54
  • Updated: 17 Jul 2014
  • views: 3751
videos
Xpress utilises the power of high resolution field of view (FOV) measurement to provide high accuracy, 2D X/Y measurements of multiple parts; typical measurement routines are completed in seconds -- all at the touch of a button. http://www.visioneng.com/xpress Multiple parts? No problem. Simply place your parts ANYWHERE in the field of view. No need to align. No need to focus. Just press RUN. Intelligent software eliminates the part alignment task and automatically locates, recognises and orientates the parts being measured. Ultimate simplicity continues with clear Go, No Go tolerance results, with full reporting capabilities for further investigation, if required. 'Field of view' non-contact measurement technology is ideally suited for fast measurement of small flat flexible parts, such as gaskets, washers, plastic and rubber extrusions; other common applications include O-rings, circlips, pressed / stamped parts, cutting tools. Please note: The measurements in this video occur in REAL TIME. There is no editing to speed up the measurements. Find out more at http://www.visioneng.com/xpress
https://wn.com/Profile_Measurement_Of_Multiple_Parts_In_Seconds_Xpress_Fov
Engineering Beats Physics? /// Xpress Breakfast with Michael & Ryan

Engineering Beats Physics? /// Xpress Breakfast with Michael & Ryan

  • Order:
  • Duration: 1:34
  • Updated: 19 Nov 2017
  • views: 57
videos
Ryan lost out in the MasterBlind quiz this week. See what he got up to on his forfeit adventure... #EngineeringBeatsPhysics Catch Michael & Ryan every Monday 7.30am - 10am over on xpressradio.co.uk/listen
https://wn.com/Engineering_Beats_Physics_Xpress_Breakfast_With_Michael_Ryan
XPress CLT Lappia Finland

XPress CLT Lappia Finland

  • Order:
  • Duration: 4:04
  • Updated: 06 Mar 2014
  • views: 33025
videos
X-Press pressing system for X-LAM (BSP, KLH, CLT, crossplan) wall elements. The flat press is designed for planar pressing of plates for wall elements. The CLT elements can be built up of loose strips in single longitudinal and cross layers as well as from previously glued single layers. Recommend is also a combination, where the across layers are prefabricated at a separate press and are then stacked with fresh side glued longitudinal strips to a pressing stack. X-Press Pressanlage für X-LAM (BSP, KLH, CLT, crossplan) Wandelemente. Die Flächenpresse ist zur flächigen Verpressung von Plattenteile für Wandelemente ausgelegt. Die BSP Elemente können aus losen Lamellen in den einzelnen Längs- und Querlagen aufgebaut werden als auch aus vorverleimten Einschichtplatten. Zu empfehlen ist auch eine Kombination wo die Querlagen auf einer separaten Presse vorgefertigt werden und danach mit den frisch Fugenverleimten Längslamellen zu einer Presslage aufgeschichtet werden. xpress BSP XLAM X-Press
https://wn.com/Xpress_Clt_Lappia_Finland
Gannen probe - Xpress Precision Engineering

Gannen probe - Xpress Precision Engineering

  • Order:
  • Duration: 1:15
  • Updated: 11 Jun 2009
  • views: 273
videos
In the video you see a Gannen-XP probe on a ultra accuracy CMM. The Gannen-XP has a total 3D uncertainty of 50 nanometers, isotropic stiffness, low probing forces and is suitable for scanning.
https://wn.com/Gannen_Probe_Xpress_Precision_Engineering
DAIKIN VRV XPRESS

DAIKIN VRV XPRESS

  • Order:
  • Duration: 8:52
  • Updated: 27 Mar 2017
  • views: 1748
videos
Professional design and simulation program for VRV systems with complete project description. User can calculate load, select the proper VRV system for the project and simulate to get an energy report. The software enables engineering of VRV systems taking into account the complex piping rules while ensuring optimum operating cycles and maximum energy efficiency. Designers can make accurate selections and get competitive quotations for each project.
https://wn.com/Daikin_Vrv_Xpress
Jabra Xpress IT Admin

Jabra Xpress IT Admin

  • Order:
  • Duration: 2:11
  • Updated: 31 Jul 2013
  • views: 2436
videos
Get all the details on Jabra Xpress' mass deployment and device management features
https://wn.com/Jabra_Xpress_It_Admin
Точное двумерное измерение небольших деталей: видеоизмерительная система Xpress

Точное двумерное измерение небольших деталей: видеоизмерительная система Xpress

  • Order:
  • Duration: 2:06
  • Updated: 17 Jan 2014
  • views: 488
videos
Видеоизмерительная система в пределах поля зрения Xpress - Сверхбыстрая. Исключительно простая. http://www.visioneng.com/xpress Xpress использует возможности измерений высокого разрешения в пределах поля зрения и с исключительной простотой обеспечивает сверхбыстрые и высокоточные бесконтактные измерения небольших плоских деталей. За счет комбинации цифровой камеры высокого разрешения и телецентрической оптики с плоским полем изображения система Xpress позволяет практически мгновенно выполнять сотни измерительных операций в пределах поля зрения. Нет необходимости позиционировать деталь и даже настраивать фокус - нужно просто поместить компонент в пределы поля зрения, а затем запустить программу. Система Xpress идеально подходит для потребителей, которым необходим максимально быстрый и простой вариант точного измерения деталей. Ключевые особенности - Быстрая и высокоточная система двумерных измерений в пределах поля зрения (FOV) - Нет необходимости в регулировке фокуса или позиционировании образцов. - Значительно сокращает время измерений. - Исключительная простота использования -- устраняет расхождения в результатах разных операторов. - Результаты типа "годен-не годен", с полным распознаванием геометрических допусков. - Обучение оператора занимает всего несколько минут.
https://wn.com/Точное_Двумерное_Измерение_Небольших_Деталей_Видеоизмерительная_Система_Xpress
Toby's Tech Talk Episode 19 - June 5, 2013 - Simulation Xpress, My.Solidworks.com

Toby's Tech Talk Episode 19 - June 5, 2013 - Simulation Xpress, My.Solidworks.com

  • Order:
  • Duration: 1:01:29
  • Updated: 06 Jun 2013
  • views: 744
videos
Toby's Tech Talk Episode 19 - June 5, 2013 - Simulation, SimulationXpress, My.SolidWorks.com Prism Engineering is THE SolidWorks Reseller for the Mid-atlantic area. Published on March 6, 2013 Live webinar of SolidWorks Tips and Tricks. Aired on March 6, 2013 Prism Engineering, Inc. Horsham, PA. AWARDED BY SOLIDWORKS- No 1. Reseller in customer service in North America 2011 and 2012 215-784-0800 www.Prismeng.com Hosted by the SolidWorks Technical Team at Prism Engineering, Inc.
https://wn.com/Toby's_Tech_Talk_Episode_19_June_5,_2013_Simulation_Xpress,_My.Solidworks.Com
V-Xpress Engineering Goods

V-Xpress Engineering Goods

  • Order:
  • Duration: 14:35
  • Updated: 09 Oct 2014
  • views: 240
videos
Our customers have express their views on how V-Xpress has helped them in giving safe and reliable deliveries by giving honoring on time commitment
https://wn.com/V_Xpress_Engineering_Goods
Xpress: How to create a measurement programme in minutes [Metlogix M3]

Xpress: How to create a measurement programme in minutes [Metlogix M3]

  • Order:
  • Duration: 2:31
  • Updated: 17 Jul 2014
  • views: 4186
videos
Xpress utilises the power of high resolution field of view (FOV) measurement to provide ultra-fast, high accuracy, 2D measurements of small parts. http://www.visioneng.com/xpress Creating a measurement programme takes less than 2 minutes, allowing you to measure single, or multiple parts in seconds. With Xpress, there is no need to position the part, or even adjust the focus -- just place the part ANYWHERE within the field of view, and then run the programme. Hundreds of measurements are taken (within the field of view) in seconds. Xpress is ideal for customers who require the fastest, simplest way to accurately measure their component parts. 'Field of view' non-contact measurement technology is ideally suited for fast measurement of small flat flexible parts, such as gaskets, washers, plastic and rubber extrusions; other common applications include O-rings, circlips, pressed / stamped parts, cutting tools. Please note: The programming in this video occurs in REAL TIME. There is no editing to speed up the process. Find out more: http://www.visioneng.com/xpress
https://wn.com/Xpress_How_To_Create_A_Measurement_Programme_In_Minutes_Metlogix_M3
Toby's Tech Talk Episode 20 - July 10, 2013 - Driveworks Xpress, Ctrl+Tab, Aux Programs

Toby's Tech Talk Episode 20 - July 10, 2013 - Driveworks Xpress, Ctrl+Tab, Aux Programs

  • Order:
  • Duration: 58:08
  • Updated: 11 Jul 2013
  • views: 249
videos
Toby's Tech Talk Episode 20 - July 10, 2013 - Driveworks Xpress, DFM Xpress, Truecrypt, Keepvid, Keypass Prism Engineering is THE SolidWorks Reseller for the Mid-atlantic area. Published on July 10, 2013 Live webinar of SolidWorks Tips and Tricks. Aired on March July 10, 2013 Prism Engineering, Inc. Horsham, PA. AWARDED BY SOLIDWORKS- No 1. Reseller in customer service in North America 2011 and 2012 215-784-0800 www.Prismeng.com Hosted by the SolidWorks Technical Team at Prism Engineering, Inc.
https://wn.com/Toby's_Tech_Talk_Episode_20_July_10,_2013_Driveworks_Xpress,_Ctrl_Tab,_Aux_Programs
X PRESS 2 clt xpress

X PRESS 2 clt xpress

  • Order:
  • Duration: 1:54
  • Updated: 24 Mar 2017
  • views: 904
videos
X-Press cross laminated timber press The X-PRESS is a powerful and effective system for production of cross laminated timber (CLT, X-Lam,...) for which You can be sure it will meet and exceed all current and future criteria for the manufacturing process. We at LEDINEK have worked with confidence and thoroughness, have used all our knowledge and experience, to create the best CLT pressing line. CLT Presse for perfect panels. Highlights: Pneumatic pressure buildup High capacity Strong top pressure up to 0,8 N/mm2 Independent side pressure for virtually any length Thickness independent front pressure Precise glue application Moveable transport carriage Automatic sequence control XPRESS is a guarantee for accuracy, high performance and top quality products. Prefabricated wooden walls, roofs, whole houses, everything is possible. Make a step in the future, rediscover the wood construction.
https://wn.com/X_Press_2_Clt_Xpress
GEC Xpress testing Meeting

GEC Xpress testing Meeting

  • Order:
  • Duration: 1:31:40
  • Updated: 27 Jul 2017
  • views: 94
videos
Meeting For the Testers for GEC Xpress
https://wn.com/Gec_Xpress_Testing_Meeting
XPRESS TO IMPRESS @M2R

XPRESS TO IMPRESS @M2R

  • Order:
  • Duration: 4:09
  • Updated: 14 Sep 2014
  • views: 373
videos
XPRESS TO IMPRESS @M2R
https://wn.com/Xpress_To_Impress_M2R
Scan-Xpress Services

Scan-Xpress Services

  • Order:
  • Duration: 3:52
  • Updated: 12 Jan 2014
  • views: 221
videos
Scan-Xpress offers service and access to extensive experience and market leading technologies in the following key areas: Non-Contact 3D Scanning Reverse Engineering Optical and Probe Inspection Design and Engineering Consultation Who can benefit from these services? The quick answer is anyone in manufacturing, engineering, design, development, surveying or testing. 3D scanning technology can be applied at any point in a typical manufacturing cycle, saving time, money and material. 3D scanning results in higher quality, better fitting parts that are less costly to manufacture. The cost of a typical manufacturing design cycle is reduced by 75% by utilizing 3D scanning. The illustration below outlines a typical manufacturing product cycle. 3D Scanning Advantages • Quickly capture all of the physical measurements of any physical object • Save time in design work • Ensure parts will fit together on the first try • Capture engineering optimizations inherent in manufactured parts • Utilize modern manufacturing on parts that were originally manufactured before CAD
https://wn.com/Scan_Xpress_Services
How to Reverse-Engineer a Satellite TV Smart Card

How to Reverse-Engineer a Satellite TV Smart Card

  • Order:
  • Duration: 4:35
  • Updated: 02 Jun 2008
  • views: 1058862
videos
Notorious hacker Chris Tarnovsky opens his underground laboratory to Wired.com, providing a peek into the world of satellite TV smart-card hacking. This complicated process involves nail polish, a pin head and various acids -- so don't try this at home (unless you're Chris Tarnovsky)!
https://wn.com/How_To_Reverse_Engineer_A_Satellite_Tv_Smart_Card
DriveWorks Xpress Introduction

DriveWorks Xpress Introduction

  • Order:
  • Duration: 4:44
  • Updated: 24 Jun 2010
  • views: 21716
videos
How to run DriveWorks Xpress within SolidWorks. All SolidWorks Seats have DriveWorks Xpress built into the CAD Window.
https://wn.com/Driveworks_Xpress_Introduction
First look at the Xpress 'instant' video measuring system

First look at the Xpress 'instant' video measuring system

  • Order:
  • Duration: 1:13
  • Updated: 05 Aug 2013
  • views: 2431
videos
Xpress utilises the power of high resolution field of view (FOV) measurement to provide high accuracy, 2D measurements of small parts, in an instant. With Xpress, there is no need to position the part, or even adjust the focus -- just place the part within the field of view, and then run the programme. Hundreds of measurements are taken (within the field of view) in seconds. Xpress is ideal for customers who require the fastest, simplest way to accurately measure their component parts. Highlights - Rapid, high accuracy 2D measurement system, within the field of view (FOV) - No need for focus adjustment or sample positioning. - Reduces measurement time -- significantly. - Exceptional ease of use -- eliminates operator variances. - Go, No Go results, with full geometric tolerancing. - Operator training takes minutes, not hours.
https://wn.com/First_Look_At_The_Xpress_'instant'_Video_Measuring_System
Mesure des profils de plusieurs pièces en quelques secondes : Xpress FOV

Mesure des profils de plusieurs pièces en quelques secondes : Xpress FOV

  • Order:
  • Duration: 1:54
  • Updated: 16 Jan 2015
  • views: 194
videos
Grâce à sa technologie de mesure haute résolution dans le champ de vision, le système Xpress fournit des mesures 2D très précises dans les axes X et Y de plusieurs pièces en quelques secondes seulement, à l'aide d’une seule touche. http://www.visioneng.fr/xpress Besoin de mesurer plusieurs pièces ? Pas de problème. Il suffit de les positionner N’IMPORTE OÙ dans le champ de vision. Pas besoin de les aligner. Pas besoin de faire la mise au point. Appuyez sur RUN. Plus besoin d’aligner les pièces avec ce logiciel intelligent qui localise, reconnaît et oriente automatiquement les pièces mesurées. Ce système est l’un des plus simples à utiliser avec ses résultats de tolérance Conforme / Non conforme, ainsi que ses fonctions complètes de reporting utiles pour la traçabilité. La technologie de mesure sans contact dans le champ de vision convient parfaitement pour la mesure rapide de petites pièces plates flexibles, telles que les joints, les rondelles, les extrusions en plastique et en caoutchouc. Elle est également couramment utilisée pour les joints toriques, les circlips, les pièces moulées sous pression / embouties, les outils de coupe. À noter : Les mesures illustrées dans cette vidéo sont réalisées en TEMPS RÉEL. Aucun montage n’a été utilisé pour accélérer les mesures. Pour en savoir plus, consultez le site http://www.visioneng.fr/xpress
https://wn.com/Mesure_Des_Profils_De_Plusieurs_Pièces_En_Quelques_Secondes_Xpress_Fov
DriveWorks Xpress Design Automation Inside SolidWorks

DriveWorks Xpress Design Automation Inside SolidWorks

  • Order:
  • Duration: 59:01
  • Updated: 11 Jun 2014
  • views: 4119
videos
BEACON- Best Engineering Aids and Consultancies Pvt Ltd is an authorised SolidWorks Reseller. http://beacon-india.com/
https://wn.com/Driveworks_Xpress_Design_Automation_Inside_Solidworks
Refrigeration Engineers - Xpress Refrigeration

Refrigeration Engineers - Xpress Refrigeration

  • Order:
  • Duration: 0:36
  • Updated: 10 Oct 2013
  • views: 44
videos
https://wn.com/Refrigeration_Engineers_Xpress_Refrigeration
XPress with vacuum station 3D

XPress with vacuum station 3D

  • Order:
  • Duration: 3:15
  • Updated: 30 May 2014
  • views: 1328
videos
LEDINEK X-Press X Press XPress with 2 tables and Vacuum stacking unit for CLT BSP production. Press for CLT pressing using 1K PU glue. High capacity CLT production line. Turn Key CLT Lines. XLAM x lam KLH cross lam X-Press
https://wn.com/Xpress_With_Vacuum_Station_3D
Xpress CLT dry test

Xpress CLT dry test

  • Order:
  • Duration: 0:55
  • Updated: 16 Oct 2014
  • views: 924
videos
First dry trials with the newly developed CLT press. Unique flexible design. Side pressure for longitudinal layers are 400 mm high! All glue lines get closed even if you make 3 x 3 layer panels. Pneumatic main pressure up to 1 N/mm² (more than most hydraulic presses) due to solid design. 1 longitudinal meter of the press weight app. 9t means a 14 m X-Press has app. 130 t own weight. Front and side pressure are servo controlled over PLC steering and is automatically adjusted to required specific pressure. X-Press
https://wn.com/Xpress_Clt_Dry_Test
×